{"id":638,"date":"2026-07-16T20:39:21","date_gmt":"2026-07-16T20:39:21","guid":{"rendered":"https:\/\/bestdedicatedwebhostingserver.com\/blog\/?p=638"},"modified":"2026-08-12T22:13:19","modified_gmt":"2026-08-12T22:13:19","slug":"dedicated-server-palworld-hardware-requirements-hosting-configuration","status":"publish","type":"post","link":"https:\/\/bestdedicatedwebhostingserver.com\/blog\/dedicated-server-palworld-hardware-requirements-hosting-configuration\/","title":{"rendered":"Palworld Server RAM and CPU Benchmarks: Configuring for 4 to 32 Players"},"content":{"rendered":"\n

Palworld is one of the most resource-hungry survival games you can self-host, and most of the “4 GB is enough” advice floating around comes from servers that run for two hours before crashing. This guide gives you real RAM and CPU numbers for 4 to 32 players, the PalWorldSettings.ini options that actually move performance, and a monitoring routine that keeps long-running servers stable.<\/p>\n\n\n\n

Why Palworld is so heavy<\/h2>\n\n\n\n

The Palworld dedicated server simulates an open world with hundreds of Pals, each with its own AI pathfinding, plus base workers, egg incubators, and persistent item drops. The engine is Unreal-based, and the server is essentially the game running headless. Memory usage is notoriously high because the world keeps every Pal, base, and dropped item in memory, and CPU load scales with both player count and base count \u2014 a server with 30 players all building large bases can use more resources than an empty 64-slot server.<\/p>\n\n\n\n

RAM benchmarks by player count<\/h2>\n\n\n\n

These allocations assume a few weeks of uptime, include the operating system, and leave headroom for save spikes. A fresh 4-player server idles around 4\u20135 GB and climbs as players build bases and capture Pals:<\/p>\n\n\n\n

Players<\/th>RAM<\/th>Notes<\/th><\/tr><\/thead>
4 players<\/td>8 GB<\/td>Works, but tight during base raids<\/td><\/tr>
8 players<\/td>12 GB<\/td>Comfortable for a private group<\/td><\/tr>
16 players<\/td>16 GB<\/td>Standard for community servers<\/td><\/tr>
24 players<\/td>24 GB<\/td>Recommended for populated worlds<\/td><\/tr>
32 players<\/td>32 GB<\/td>For full servers with many bases<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

The single biggest memory driver is the number of active bases and Pals, not raw player count. If you are budgeting, count bases first: each active base camp with workers adds roughly 1\u20132 GB of world state on a long-running server. Memory is also the spec where hosts under-advertise the most, so check the real hardware \u2014 the provider reviewed on this site<\/a> publishes exact RAM sizes and CPU models instead of “up to” language.<\/p>\n\n\n\n

CPU: core count matters here<\/h2>\n\n\n\n

Unlike many survival games, Palworld spreads its load across multiple threads. A modern 8-core CPU at 3.5 GHz+ is the sweet spot for up to 16 players; go 12\u201316 cores if you want headroom for 32 players plus the OS and a backup task. Avoid old low-clock server CPUs: Palworld’s simulation is tied to real time, and when the CPU cannot keep up, the server slows down \u2014 players see rubber-banding and “connection timed out” errors rather than a graceful degradation. Sustained multi-core performance is what separates a good Palworld box from a bad one.<\/p>\n\n\n\n

The PalWorldSettings.ini options that matter<\/h2>\n\n\n\n

Edit PalWorldSettings.ini in the server’s Pal\/Saved\/Config\/LinuxServer folder. These options have the biggest impact on performance and stability:<\/p>\n\n\n\n